Description
The Danfoss RSA 60 070L3360 pump is designed for equipping 1-stage liquid fuel burners with a fuel consumption of up to 120 l/h. It is equipped with a pressure regulator with shut-off and a special spring. It is designed for single-pipe and dual-pipe connection.
Features and main parameters:
- for pumping kerosene, gasoline, light fuel with a viscosity of 1.3-18 cSt;
- pressure regulation within 5.5-21 bar, factory setting – 7 ±1 bar;
- permissible fuel temperature inside the pump -10...+120 °C;
- sleeve connection, ∅ 54 mm;
- filter-mesh for cleaning the flow from abrasive particles larger than 150 microns;
- inlet/outlet pressure – 4 bar;
- wear-resistant working unit, compact design.
The Danfoss RSA pump is used in single-pipe and dual-pipe configurations. When used in dual-pipe designs, a bypass plug must be installed in the return line opening, and when connected in a single-pipe configuration, the outlet to the fuel return channel must be plugged.
Characteristics
Strainer: Opening size: 150 µmFuel consumption: 120 l/hReturn pressure: 4 barTorque: 0.24 N·mMaximum rotation speed: 3,600 rpmMaximum pressure of the solenoid valve: 5 barNominal rotation speed: 1,400 rpmSolenoid valve consumption: 89 WStrainer: Open area: 75 cm²Factory pressure setting: 7 barShaft diameter: 10 mmInlet pressure: 4 barOperating viscosity: from 1.3 to 18 mm²/sNozzle pressure range: from 5.5 to 21 barDirection of rotation (looking at the drive shaft): L: counterclockwise rotationInstallation method: sleeve ⌀54 mmType of pumped liquid: kerosene, gasolineConnection type: R 1 1/4"
Information about the technical characteristics, appearance and color of the product is for reference only and is based on the latest information available at the time of publication
