Description
The Giuliani Anello 70107/03 liquid fuel filter, art: 001.0110.004 is designed to clean diesel fuel and fuel oil from foreign particles, protecting the fuel line from clogging and damage. It is used in industrial heating equipment. It is designed for a fuel pressure of up to 2 bar.
More about the filter
The Giuliani Anello filter is distinguished by its high reliability and durability. The body and cover are cast from corrosion-resistant aluminum alloy. The cover has Rp ½" threaded holes for connection to the fuel line. Inside, there is a serviceable filter element made of stainless steel with a cleaning area of 330 cm² and a filtration capacity of 60 microns. The filter does not allow coarse particles into the system, including sand, rust, debris and other foreign inclusions.
The design is suitable for operation at temperatures up to +90 ºС. The filter is equipped with NBR rubber seals, which can be replaced with a Viton gasket upon customer request for safe operation with biodiesel (upon request).
Filter installation and maintenance
When installing the filter, the arrow on the housing must be directed in the direction of fuel flow. Any position in the system is possible, but a vertical position of the flask (directed downwards) is preferable to facilitate the separation of sediment and deposits.
To service the filter element, it is necessary to unscrew the screws on the cover, remove the flask, and thoroughly wash and blow it out with compressed air from the inside.
Advantages:
- cast reliable aluminum and steel construction;
- effective cleaning of the flow from impurities and dirt particles;
- serviceable filter element made of stainless steel;
- large filtration area;
- variability of installation position;
- resistance to high pressure and temperatures;
- hermetic threaded connection.
Application
The Giuliani Anello filter is designed to equip industrial installations operating on diesel fuel and fuel oil. On request, it can be supplied in a version for biodiesel.