Description
The Kromschroder BCU370WFEU0D3 TS 5 burner control unit, art: 88600023 is designed to control gas overpressure burners of unlimited power with continuous and intermittent operation modes. Certified according to European standards. It has built-in memory for storing fault data. Equipped with an informative display to view parameters, current status and failure information. Allows you to program the burner and perform diagnostics through the optical interface using the BCSoft program.
Characteristics and features:
- connection to the electrical network 220 V, -15%, +10%;
- support for continuous and intermittent operation modes;
- fan and damper control;
- ionization flame tracking method or with a UV sensor UVS;
- pre-purge before each ignition for 60 seconds;
- built-in valve tightness control;
- manual control mode for simplified start-up and maintenance (duration 5 min.);
- use in systems with direct and pilot ignition;
- control of gas and air pressure;
- one burner start attempt;
- system lock in case of flame signal loss during burner operation;
- shortened start-up program (optional), without purging;
- transmission of malfunction messages using the information system;
- informative messages on the display about the operating state and malfunctions;
- protection of electrical and electronic components from dust and moisture class IP 54;
- permissible operating temperatures: -20...+60°C;
- internal memory storing data about the last 10 failures;
- possibility of connecting a bus for data exchange;
- restart by pressing the reset button or remotely.
The ionization electrode is used in systems with continuous and repeated-short-term cycles, the UV sensor UVS – in installations with intermittent mode.
Device
The burner control unit is equipped with an ergonomic housing made of heat-resistant, impact-resistant plastic. The front panel contains controls: an informative display, operating indicators, a reset button. The delivery set includes a base and connection cables.
Information about the stages of burner operation, operating parameters, flame signal intensity and failures is displayed on the display. Parameterization via the optical interface and BCSoft software guarantees maximum adaptation of the burner control unit to a specific installation (option).
Advantages:
- digital signal processing, high control accuracy;
- application in burners of any power with continuous/ intermittent operation;
- built-in valve tightness control;
- display informativeness, wide functionality;
- built-in memory storing data about the last failures;
- system bus interface;
- manual control mode;
- convenience of programming operating parameters.
You can buy Kromschroder burner control units and other components for the safe and efficient functioning of burners from the warehouse and on order.