Description
The Suntec AL 65 C 9525 6P 0500 pump is designed for equipping diesel burners with a capacity of up to 1000 kW. The design includes a locking solenoid valve with a shut-off function. Placement in the nozzle line ensures instantaneous activation of the solenoid valve in any engine operating mode.
Features
- The pump is equipped with a reliable housing with a high degree of protection against dust and moisture (European standard IP54).
- The pump gears are protected from damage by a mesh filter that retains sand, rust and other abrasive particles larger than 150 microns.
- The electromagnetic "normally closed" valve is installed in the nozzle line, which ensures an instantaneous response. When activated, the solenoid valve supplies fuel to the nozzle line under pressure set by the regulating valve.
- At the factory, the pump is set to 9 bar. If necessary, the pressure to the nozzle can be changed in the range from 8 to 15 bar.
- The pump is ready for a 2-pipe connection (a bypass plug is installed in the return line). When installing in a single-pipe system, the bypass plug should be removed, and the drain hole should be covered with a steel plug with a washer.
- Mounting is carried out using a ∅32 mm sleeve connection, which complies with EN 225 standard, allowing the pump to be used for burners from most manufacturers.
Advantages:
- optimal performance;
- locking solenoid valve with a locking function;
- universal mounting method;
- fuel cleaning before entering the gear mechanism;
- high degree of protection against dust and moisture (IP54);
- single- and two-pipe connection;
- instantaneous activation of the solenoid valve;
- ports for measuring equipment;
- trouble-free operation.
You can buy the Suntec AL 65 C 9525 6P 0500 pump and all the necessary spare parts for assembling the heating system on our website. You can ask online consultants of ANKAS additional questions about the equipment specifications and selection of components.
Characteristics
Nozzle outlet: ⅛ inchSolenoid valve voltage: 220-240V~, 50-60HzBy-pass plug: It is installed in the return line for a two-pipe system and is removed with a hexagonal wrench withVacuum gauge port: ⅛ inchPressure gauge port: ⅛ inchPump series: AL: pressure regulation and interlock solenoid valve with shut-off functionReturn pressure: 2 barTorque: 0.12 N·mMaximum rotation speed: 3,600 rpmMaximum pressure of the solenoid valve: 25 barNominal rotation speed: 2,850 rpmSolenoid valve consumption: 9 WStrainer: Open area: 6 cm²Strainer: Opening size: 150 µmOperating viscosity: from 2 to 12 mm²/sValve function: pressure regulatingModel type: 1 stage with electromagnetic valveInstalling the bypass plug: P: bypass plug installed in return line for two-pipe systemDirection of rotation (looking at the drive shaft): C: counterclockwise rotation / nozzle on the leftOil temperature: from 0 to 60 °C in the pumpPerformance for stage 2 at 11 bar and 5 cSt viscosity: 81 l/hShaft design: one cavityFactory pressure setting: 9 barSuction and return line: ¼ inch NPTF (taper thread)Nozzle pressure range: from 8 to 15 barShaft diameter: 8 mmInlet pressure: 2 barSuction height: 0.45 bars max. vacuum to prevent air separation from oilType of pumped liquid: dieselInstallation method: sleeve ⌀32 mmDegree of protection: IP54
Information about the technical characteristics, appearance and color of the product is for reference only and is based on the latest information available at the time of publication
