Characteristics
Installing the bypass plug: P: bypass plug installed in return line for two-pipe systemPump series: AL: pressure regulation and interlock solenoid valve with shut-off functionPressure gauge port: ⅛ inchVacuum gauge port: ⅛ inchReturn pressure: 2 barTorque: 0.14 N·mMaximum rotation speed: 3,600 rpmMaximum pressure of the solenoid valve: 25 barNominal rotation speed: 2,850 rpmSolenoid valve consumption: 9 WPerformance at 11 bar and 1.8 cSt viscosity for Kerosene: 80 l/hStrainer: Open area: 20 cm²Strainer: Opening size: 150 µmBy-pass plug: It is installed in the return line for a two-pipe system and is removed with a hexagonal wrench withOperating viscosity: from 1 to 12 mm²/sValve function: pressure regulatingModel type: 1 stage with electromagnetic valveSolenoid valve voltage: 220-240V~, 50-60HzOil temperature: from 1 to 60 °C in the pump2nd stage performance at 11 bar and 1.8 cSt viscosity for Kerosene: 80 l/hShaft design: one cavityFactory pressure setting: 12 barDirection of rotation (looking at the drive shaft): C: counterclockwise rotation / nozzle on the leftNozzle pressure range: from 8 to 15 barShaft diameter: 8 mmInlet pressure: 2 barSuction height: 0.45 bars max. vacuum to prevent air separation from oilSuction and return line: ¼ inch NPTF (taper thread)Nozzle outlet: ⅛ inchInstallation method: sleeve ⌀32 mmDegree of protection: IP54Type of pumped liquid: kerosene, diesel
Information about the technical characteristics, appearance and color of the product is for reference only and is based on the latest information available at the time of publication