Characteristics
Factory pressure setting: 9 barStrainer: Opening size: 150 µmStrainer: Open area: 6 cm²Solenoid valve consumption: 9 WNominal rotation speed: 2,850 rpmMaximum pressure of the solenoid valve: 25 barMaximum rotation speed: 3,600 rpmPerformance at 7 bar pressure and 5 cSt viscosity: 50 l/hFactory settings for low pressure: 9 barFactory installations for high pressure: 22 barTorque: 0.1 N·mShaft diameter: 8 mmInlet pressure: 2 barReturn pressure: 2 barValve function: pressure regulation without locking functionPump series: AP2: two operating modes (1 nozzle / 2 pressure modes), no shut-off functionPressure gauge port: ⅛ inchVacuum gauge port: ⅛ inchOperating viscosity: from 2 to 12 mm²/sInstalling the bypass plug: P: bypass plug installed in return line for two-pipe systemBy-pass plug: It is installed in the return line for a two-pipe system and is removed with a hexagonal wrench withOil temperature: from 0 to 60 °C in the pumpSolenoid valve voltage: 220-240 or 110-120 or 24 VNozzle pressure range: from 8 to 25 barSuction height: 0.45 bars max. vacuum to prevent air separation from oilSuction and return line: ¼ inchNozzle outlet: ⅛ inchInstallation method: sleeve ⌀32 mmDegree of protection: IP54Direction of rotation (looking at the drive shaft): C: counterclockwise rotation / nozzle on the left
Information about the technical characteristics, appearance and color of the product is for reference only and is based on the latest information available at the time of publication