Characteristics
Factory installations for high pressure: 22 barStrainer: Opening size: 150 µmStrainer: Open area: 6 cm²Performance at 11 bar pressure and 5 cSt viscosity: 85 l/hSolenoid valve consumption: 9 WNominal rotation speed: 2,850 rpmMaximum pressure of the solenoid valve: 25 barMaximum rotation speed: 3,600 rpmFactory settings for low pressure: 9 barNozzle outlet: ⅛ inchTorque: 0.1 N·mReturn pressure: 2 barPump series: AT2: two operating modes (1 nozzle / 2 pressure modes), with built-in solenoid valve in lPressure gauge port: ⅛ inchVacuum gauge port: ⅛ inchBy-pass plug: It is installed in the return line for a two-pipe system and is removed with a hexagonal wrench withSolenoid valve voltage: 220-240 or 110-120 or 24 VOperating viscosity: from 1 to 12 mm²/sValve function: pressure regulatingInstalling the bypass plug: P: bypass plug installed in return line for two-pipe systemModel type: 2-stage with electromagnetic valveDirection of rotation (looking at the drive shaft): D: counterclockwise rotation / nozzle on the rightOil temperature: from 0 to 60 °C in the pumpShaft design: two cavitiesSuction and return line: ¼ inch NPTF (taper thread)Nozzle pressure range: from 8 to 25 barSuction height: 0.45 bars max. vacuum to prevent air separation from oilInlet pressure: 2 barShaft diameter: 8 mmInstallation method: sleeve ⌀32 mmDegree of protection: IP54Type of pumped liquid: kerosene, diesel
Information about the technical characteristics, appearance and color of the product is for reference only and is based on the latest information available at the time of publication