Characteristics
Factory installations for high pressure: 22 barStrainer: Opening size: 150 µmStrainer: Open area: 20 cm²Performance at 11 bar pressure and 5 cSt viscosity: 108 l/hSolenoid valve consumption: 9 WNominal rotation speed: 2,850 rpmMaximum pressure of the solenoid valve: 25 barMaximum rotation speed: 3,600 rpmFactory settings for low pressure: 9 barNozzle outlet: ⅛ inchTorque: 0.14 N·mReturn pressure: 2 barPump series: AT2: two operating modes (1 nozzle / 2 pressure modes), with built-in solenoid valve in lPressure gauge port: ⅛ inchVacuum gauge port: ⅛ inchBy-pass plug: It is installed in the return line for a two-pipe system and is removed with a hexagonal wrench withSolenoid valve voltage: 220-240 or 110-120 or 24 VOperating viscosity: from 2 to 12 mm²/sDirection of rotation (looking at the drive shaft): B: clockwise rotation / nozzle on the leftSuction and return line: ¼ inch NPTF (taper thread)Suction height: 0.45 bars max. vacuum to prevent air separation from oilInlet pressure: 2 barShaft diameter: 8 mmNozzle pressure range: from 8 to 25 barShaft design: one cavityPerformance for stage 2 at 11 bar and 5 cSt viscosity: 87 l/hOil temperature: from 0 to 60 °C in the pumpModel type: 2-stage with electromagnetic valveInstalling the bypass plug: P: bypass plug installed in return line for two-pipe systemValve function: pressure regulatingType of pumped liquid: dieselInstallation method: sleeve ⌀32 mmDegree of protection: IP54
Information about the technical characteristics, appearance and color of the product is for reference only and is based on the latest information available at the time of publication