Description
The Suntec T 4 A 10 7 burner pump is industrial high-performance equipment for pumping diesel fuel and fuel oil under pressure up to 40 bar. It is used to equip powerful heating systems. The design does not contain pressure regulating and solenoid valves. Thermally resistant execution and a special mounting seat allow installation of an electric heater, facilitating cold start.
Features:
- universal purpose – for fuel oil, crude oil, diesel fuel;
- construction adapted for working with heated fuel;
- setting pressure parameters in a wide range, from 1 to 40 bar;
- temperature of the pumped medium 0…+150 °C;
- hole in the housing for mounting a fuel heater;
- for working with fuel viscosity of 3-75 cSt, it can be used for more viscous types of fuel if the viscosity is reduced to the recommended level by preheating;
- flange connection method, ∅ 70 mm;
- bypass plug between the high-pressure area and the shaft seal to change the direction of rotation;
- threaded ports for pressure gauge and vacuum gauge G¾";
- without built-in filter, a motorized filter must be installed after the pump;
- special execution for industrial purposes with high throughput;
- version without a shut-off solenoid valve.
The manufacturer recommends equipping the Suntec T 4 A 10 7 burner pump with an external SUNTEC TV valve to regulate the pressure.
Characteristics
Performance at 11 bar pressure and 5 cSt viscosity: 3,714 l/hPerformance at 30 bar pressure and 75 cSt viscosity: 3,948 l/hPerformance at 30 bar pressure and 5 cSt viscosity: 3,300 l/hPerformance at 20 bar pressure and 20 cSt viscosity: 3,879 l/hPerformance at 14 bar pressure and 75 cSt viscosity: 3,980 l/hPerformance at 14 bar pressure and 20 cSt viscosity: 3,905 l/hPerformance at 20 bar pressure and 5 cSt viscosity: 3,522 l/hVacuum gauge port: ¼ inchPressure gauge port: ¼ inchPump series: T: no pressure adjustmentTorque: 0.4 N·mMaximum rotation speed: 3,600 rpmNominal rotation speed: 2,850 rpmSolenoid valve consumption: 460 - 3,530 WDirection of rotation (looking at the drive shaft): A: clockwise rotation / nozzle on the rightOperating viscosity: from 3 to 75 mm²/sModel type: without electromagnetic valveNozzle outlet: ¾ inchSuction and return line: ¾ inchOil temperature: from 0 to 150 °C in the pumpPerformance at 7 bar pressure and 5 cSt viscosity: 3,815 l/hSuction height: 0.45 bars max. vacuum to prevent air separation from oilInlet pressure: 0.45 - 0.5 barShaft design: one cavityNozzle pressure range: from 1 to 40 barShaft diameter: 20 mmInstallation method: flange ⌀70 mmType of pumped liquid: diesel, sea water
Information about the technical characteristics, appearance and color of the product is for reference only and is based on the latest information available at the time of publication