Suntec TA 3 C 4010 7 Burner Pump

Suntec

About product

Vacuum gauge port ¼ inchPerformance at 11 bar pressure and 5 cSt viscosity 707 l/hDirection of rotation (looking at the drive shaft) C: counterclockwise rotation / nozzle on the leftNominal rotation speed 2,850 rpmMaximum rotation speed 3,600 rpmTorque 0.3 N·m

Description

Elco, Lamborghini, Baltur, Weishaupt industrial burners with a capacity of up to 30000 kW require decent equipment. The Suntec TA 3 C 4010 7 fuel pump combines impeccable performance, versatile installation and safe design. It operates on fuel with a viscosity of 3-75 cSt: fuel oil, diesel fuel, crude oil.

Design features

The pump is equipped with a pressure regulating valve, which allows you to adjust the fuel supply parameters taking into account production tasks. Permissible range: 7-40 bar, factory setting — 30 atm. Due to the lack of a locking function, the fuel supply is stopped manually.
The design is characterized by heat-resistant execution. Thanks to the use of special seals, the pump is designed to operate with fuel, the temperature of which reaches +150 degrees.
There is a hole for a heating device with a power of 80-100 W on the case. The thoughtful location of the heater ensures the best heat transfer without direct contact with the fuel. Installation of the electrical appliance is carried out in accordance with the European standard.
The pump can be used in two- and single-pipe installations. For systems without a return line, the bypass plug should be unscrewed and the fuel drain should be blocked.
Built-in filter is not included in the package.

Additional options

You can protect the nozzles from clogging and the fuel system from emergency failures by installing a motorized filter with a degree of purification of 200 microns (option, price is indicated without a filter). Installation location — after the pump.

For uninterrupted operation of the pump and prevention of premature wear when working with fuel oil, the manufacturer recommends using a degassing bulb in the pipeline.

Professionals note the following advantages of the model:

high-performance fuel supply – 780 l/hour at a viscosity of 75 cSt and a pressure of 30 bar;
pressure adjustment taking into account operating conditions in the range of 7-40 atm;
easy start-up when installing a heating device;
cylindrical threaded connections for monitoring instruments and pipelines;
heat-resistant design — operating fuel temperature 0...+150 degrees;
automatic air removal from 2-pipe systems.

You can find out more about the features of installation, adjustment and operation of the pump in the manufacturer's instructions (attached file). Before buying the Suntec TA 3 C 4010 7 fuel pump, check the characteristics against the burner specification.

Characteristics

Vacuum gauge port: ¼ inchPerformance at 11 bar pressure and 5 cSt viscosity: 707 l/hDirection of rotation (looking at the drive shaft): C: counterclockwise rotation / nozzle on the leftNominal rotation speed: 2,850 rpmMaximum rotation speed: 3,600 rpmTorque: 0.3 N·mReturn pressure: 5 barPump series: TA: Pressure controlPressure gauge port: ¼ inchSolenoid valve consumption: 310 - 1,250 WBy-pass plug: It is installed in the return line for a two-pipe system and is removed with a hexagonal wrench withPerformance at 20 bar pressure and 5 cSt viscosity: 656 l/hPerformance at 14 bar pressure and 20 cSt viscosity: 756 l/hPerformance at 14 bar pressure and 75 cSt viscosity: 779 l/hPerformance at 20 bar pressure and 20 cSt viscosity: 752 l/hPerformance at 30 bar pressure and 5 cSt viscosity: 614 l/hPerformance at 30 bar pressure and 75 cSt viscosity: 780 l/hPerformance at 7 bar pressure and 5 cSt viscosity: 718 l/hNozzle outlet: ½ inchSuction and return line: ½ inchInlet pressure: 5 barShaft diameter: 12 mmNozzle pressure range: from 7 to 40 barFactory pressure setting: 30 barShaft design: one cavityOil temperature: from 0 to 150 °C in the pumpModel type: without electromagnetic valveValve function: pressure regulatingOperating viscosity: from 3 to 75 mm²/sInstallation method: flange ⌀54 mmType of pumped liquid: sea water, diesel

Information about the technical characteristics, appearance and color of the product is for reference only and is based on the latest information available at the time of publication

This product is from the collections

Pumps Suntec TA Burner pumps Diesel Burner Pumps

Suntec

Brand

France — home of the brand

France — country of origin

Packaging information

Weight, kg:: 5.7
Width, cm:: 17
Height, cm:: 13
Length, cm:: 15.6